INPUT

Connectors:

 1/4" TRS, female XLR (pin 2 hot), and barrier terminal strip

Type:

Electronically balanced/unbalanced, RF filtered

Impedance:

Balanced 40k ohm, unbalanced 20k ohm

Max Input Level:

>+21dBu balanced or unbalanced

CMRR:

>40dB, typically >55dB at 1kHz

OUTPUTS

Connectors:

 1/4" TRS, male XLR (pin 2 hot), and barrier terminal strip

Type:

Impedance-balanaced/unbalanced, RF filtered

Impedance:

Balanced 200 ohm, unbalanced 100 ohm

Max Output Level:

 >+21dBu balanced/unbalanced into 2k or greater
  >+20dBm balanced/unbalanced (into 600)

SYSTEM PERFORMANCE

Bandwidth:

20Hz to 20kHz, +/-0.5dB

Frequency Response:

<10Hz to >50kHz, +0.5/-3dB

Noise Reduction In:

 (+/-6 and +/-12dB range):

Signal-to-Noise:

 >102dB, unweighted, ref: +4dBu, 22kHz measurement bandwidth

Dynamic Range:

 >120dB, unweighted

Noise Reduction Out:

 (+/-6dB range):

Signal-to-Noise:

 >94dB, unweighted, ref: +4dBu, 22kHz measurment bandwidth

Dynamic Range:

 >112dB, unweighted

Noise Reduction Out:

 (+/-12dB range):

Signal-to-Noise:

 >90dB, unweighted, ref: +4dBu, 22kHz measurement bandwidth

Dynamic Range:

 >108dB, unweighted

THD + Noise:

<0.04%, 0.02% typical at +4dBu, 1kHz

Interchannel Crosstalk:

<-80dB, 20Hz to 20kHz

Noise Reduction:

Up to 20dB of dynamic broadband noise reduction

FUNCTION SWITCHES

Type III? NR:

Activates dbx? Type III? Noise Reduction

EQ Bypass:

Bypasses the Graphic Equalizer section in the signal path

Low Cut (recessed):

Activates the 40Hz 18dB/octave Bessel high-pass filter

Range (recessed):

Selects either +/- 6dB or +/-15dB slider boost/cut range

INDICATORS

Output Level Meter:

 4-LED bar graph (Green, Green, Yellow, Red) at -10, 0, +10, and +18dBu

Gain Reduction Meter:

4-LED bar graph (all Red) at 0, 3, 6, and 10dB

Type III? NR Active:

Yellow LED

EQ Bypass:

Red LED

Clip:

Red LED

Low Cut Active:

Red LED

+/-6dB range:

Yellow LED

+/-12dB range:

Red LED

POWER SUPPLY

Operating Voltage:

100VAC 50/60Hz, 120VAC 60Hz, 230VAC 50/60Hz

Power consumption:

23W

Main Connection:

IEC receptacle

PHYSICAL

Dimensions:

5.25" H X 19" W X 7.9" D (8.9cm x 48.3cm x 20.1cm)